Smoothie Remote Reservoirs are for universal fitment.
In a Universal application, there is different sizes to serve your needs. Plain Bearing Ball joint is self lubricant and suited for heavy duty use or even competition use. The hole diameter is 16mm on both ends which is very strong and match all heavy duty applications.
The advanced piston provides ultimate performance that comes with high precision and a super polished shaft. They are chromed and induction heat treated which adds more strength to endure all road conditions, and heavy duty use.
These are made of the highest quality material that allows them provide excellent performance. 100% QC tested and Aluminum components are all machined to reach excellent tolerances.
SPECIFICATION
Travel | Ext. Length | Col. Length | Outter Shell | Piston Rod |
8″ | 24″ | 16″ | 52×295 mm. | 20×315 mm. |
9″ | 26″ | 17″ | 52×320 mm. | 20×340 mm. |
10″ | 28″ | 18″ | 52×345 mm. | 20×365 mm. |
10″ | 30″ | 20″ | 52×395 mm. | 20×390 mm. |
11″ | 32″ | 21″ | 52×420 mm. | 20×415 mm. |
12″ | 34″ | 22″ | 52×445 mm. | 20×440 mm. |
13″ | 36″ | 23″ | 52×470 mm. | 20×465 mm. |
14″ | 38″ | 24″ | 52×490 mm. | 20×500 mm. |




Hi mate, have a coil cab patrol with 3″ lift. Was wondering what the best size shocks i should install with 3in coils?
Hi Jaxon,
We are currently out of stock of the Profender brand, however we do have the Superior Engineering brand landing at the end of next week.
They are a similar construction to the Profender units however ours have a few refinements to make them a very nice shock for both off and onroad applications
Please see the link below.
https://www.superiorengineering.com.au/4×4-suspension/shock-absorbers?filter=128&manufacturer_filter=23&attr_filter=3+inch
If you require any further information please don’t hesitate to contact me.
Regards
Ben
Hi guys
Ive just brought a new np300 d23 navara looking at doing a 2-3″ lift, i have adjustable uca off old d40 .
I’m looking for adjustable front struts and coils in front, and longer shocks with higher coil springs or blocks in the rear.
What products do you have?
Hi Chris
We are finalising a range of suspension kits, including Upper Control Arms for the New Navara NP300 D23.
We will contact you in the next week with a few different options.
Regards
Matt
Hi
I’m after some shocks for my suzuki buggy
I’m after adjustable shocks..eye to eye,shaft at bottom for clearance purposes…
I have doetsch shocks at the moment…
Closed length eye to eye need preff about 470mm or less
Open minimum 670mm
Hi Karl,
The closest shocks I would have for your Suzuki buggy would be a 3 inch patrol rear shock which is eye-eye it is 700mm open & 435mm closed with 265mm travel and they are the adjustable for $315.00 each.
We currently are waiting on these to come back into stock we are hoping to see them within 3 weeks.
I hope this has helped and look forward to hear from you soon.
Regards
Chris
Chris
Can you please advise when these shocks are in..I think these will do fine…
Hey Karl,
I have 2 pair on the shelf at this point if you would like to buy them please let me know.
I have only just noticed your reply..Do you have a pair of these still in stock??
Hi Karl
Thanks for getting back to us.
Unfortunately the shocks you were talking about are now out of stock.
However we many have some alternatives available to suit your requirements.
If you can please email me your phone number and I will get Dan to give you a call.
This might be the easiest option to answer your query.
Regards
Keith
Hey there
How much are your 12″ adjustable remote res smoothie shocks?
Cheers
No I don’t unfortunately. However I do have a set of 2.5 14” in the clearance section if you are looking for a big shock.
http://www.superiorengineering.com.au/product_info.php?cPath=3198&products_id=24953